Donald Judd American, 1928-1994
Bullnose Progression (Brass) , 1975
Brass
5 x 25 1/2 x 8 1/4 in. / 12.7 x 64.8 x 21 cm
Sold
Photo: Zachary Balber
Sold
Donald Judd - Objects - In 1962, Donald Judd created his first work in three-dimensions. Made out of wood, masonite and an asphalt pipe, this freestanding piece was the first...
Donald Judd - Objects -
In 1962, Donald Judd created his first work in three-dimensions. Made out of wood, masonite and an asphalt pipe, this freestanding piece was the first object that he exhibited. Judd followed this piece with a second freestanding piece made out of wood and a right-angled metal pipe. He would go on to create ten major works in 1963, exhibiting eight of them, three built for the wall and five for the floor, in his one-man exhibition at the Green Gallery in New York in 1963. As Judd stated in an interview in 1971:
I was surprised when I made those first two freestanding pieces, to have something set out into the middle of the room. It puzzled me. On the one hand, I didn’t quite know what to make of it, and on the other, they suddenly seemed to have an enormous number of possibilities. It looked at that point and from then on that I could do anything. Anyway, I certainly didn’t think I was making sculpture.
Not sculpture or painting, Judd called these new objects “Specific Objects.” Characterizing the qualities of this new work in a 1965 essay of the same title, Judd assessed the importance of the paintings of Jackson Pollock, Mark Rothko, Barnett Newman and Clyfford Still in the development of three-dimensional work and references the work of his contemporaries, such as Lee Bontecou, John Chamberlain, Dan Flavin, and Claes Oldenburg, among others, as examples of this new kind of art. As Judd wrote in his last published essay of 1993:
Before the right angle and its predecessor, all ‘sculpture’ was placed on a pedestal…Nothing had ever been placed directly on the floor….Since now it is common for work to be placed anywhere in a room, it is impossible for people to understand that placement on the floor and the absence of a pedestal were inventions. I invented them.
Wall Piece
A wall piece consists of one single unit or multiple units, usually rectangular in shape, hanging on the wall. These works are often referred to using terms that relate to their structure or orientation (i.e., single unit or multiple unit “stacks,” “wall units,” horizontal wall pieces, progressions, bullnose, or “meter boxes”) or place of fabrication (Enameled aluminum wall pieces, first made by Swiss fabricator Lehni and subsequently by other fabricators, are often referred to as “Swiss pieces”).
In 1962, Donald Judd created his first work in three-dimensions. Made out of wood, masonite and an asphalt pipe, this freestanding piece was the first object that he exhibited. Judd followed this piece with a second freestanding piece made out of wood and a right-angled metal pipe. He would go on to create ten major works in 1963, exhibiting eight of them, three built for the wall and five for the floor, in his one-man exhibition at the Green Gallery in New York in 1963. As Judd stated in an interview in 1971:
I was surprised when I made those first two freestanding pieces, to have something set out into the middle of the room. It puzzled me. On the one hand, I didn’t quite know what to make of it, and on the other, they suddenly seemed to have an enormous number of possibilities. It looked at that point and from then on that I could do anything. Anyway, I certainly didn’t think I was making sculpture.
Not sculpture or painting, Judd called these new objects “Specific Objects.” Characterizing the qualities of this new work in a 1965 essay of the same title, Judd assessed the importance of the paintings of Jackson Pollock, Mark Rothko, Barnett Newman and Clyfford Still in the development of three-dimensional work and references the work of his contemporaries, such as Lee Bontecou, John Chamberlain, Dan Flavin, and Claes Oldenburg, among others, as examples of this new kind of art. As Judd wrote in his last published essay of 1993:
Before the right angle and its predecessor, all ‘sculpture’ was placed on a pedestal…Nothing had ever been placed directly on the floor….Since now it is common for work to be placed anywhere in a room, it is impossible for people to understand that placement on the floor and the absence of a pedestal were inventions. I invented them.
Wall Piece
A wall piece consists of one single unit or multiple units, usually rectangular in shape, hanging on the wall. These works are often referred to using terms that relate to their structure or orientation (i.e., single unit or multiple unit “stacks,” “wall units,” horizontal wall pieces, progressions, bullnose, or “meter boxes”) or place of fabrication (Enameled aluminum wall pieces, first made by Swiss fabricator Lehni and subsequently by other fabricators, are often referred to as “Swiss pieces”).